Ignite Retro Tread Foam Grip Tape – Unmatched Comfort, Control & Durability

🚨 12-19-24 UPDATE: Our logo printer is currently out of service. For now, all grip tape will ship WITHOUT the Ignite logo printed on the surface.

⚠️ This listing is for ONE (1) footpad grip tape ONLY!
For a complete set, be sure to add BOTH a front and rear footpad grip tape separately to your cart.

Why Choose Ignite Foam Grip Tape?

Foam grip tape is a game-changer in performance, comfort, and style! Our unique combination of geometry, adhesive, foam, and grip tape lets your feet lock in like never before. Our hexagon design moves and flexes with your feet, giving you superior control and an ultra-comfortable ride.

✅ Protect & Style – Pair with our 1WP Colored Wraps for added protection and a custom look. (As of 8-28-2024, all Colored Wraps now come pre-installed on the back of the Grip Tape for easier installation.)

✅ Targeted Replacement – No need to change out the entire grip tape! Swap out worn-down sections quickly and easily, saving time and money.
✅ No Ghosting Issues! – ALL Ignite Grip Tape, Foam Grip Tape, & Colored Wraps are PERFORATED for easy installation and to prevent sensor malfunctions.

Choose Your Perfect Thickness:

✅ 0mm (Standard Grip Tape Only) – Traditional feel, no added foam.
✅ 2mm (Performance Focused) – Ideal for extreme riders. Lower profile = less prone to damage from high-speed tumbles on rough terrain.
✅ 4mm (Maximum Comfort) – Ultimate “couch-like” feel underfoot, perfect for riders who prioritize comfort.

No matter which size you choose, you’re getting top-tier performance, extreme durability, and toughness that can withstand aggressive riding conditions.

Premium Construction & Easy Removal

✔ Ultra-Strong Grip – Our Ignite 20-grit grip tape is laminated to our shock-absorbing gel foam for unbeatable traction.
✔ Industry-Leading Adhesion – We laminate and perforate everything in-house using a custom 3M adhesive, specially formulated for Onewheel footpads.
✔ Residue-Free Removal – Sticks securely but peels off cleanly when needed.
✔ Works on Any Footpad Material – Adheres to wood, plastic, rubber, polycarbonate, urethane, aluminum, metal, and more!
✔ Sensor-Safe Perforation – All Ignite Grip Tape is pre-perforated to ensure easy installation without interfering with footpad sensors.

100% Satisfaction Guarantee!! Don't be fooled by our imposters! Our Grip actually sticks and wont peel apart! ALL of our Grip Tape, Foam, & Color wraps get Laminated and perforated with our Specially Formulated Adhesives!!!

With over 5+ years of R&D in the Onewheel industry, we’re confident you’ll love Ignite Grip Tape from the very first ride. That’s why we offer a MONEY-BACK GUARANTEE—if you're not blown away, we'll make it right!

Join thousands of happy riders who trust Ignite as their go-to grip tape for Onewheels and E-Skateboards!

🔥 Looking for a deal? Blem Foam Grip Tape is available for 30% OFF in the Clearance/Blem Section of our website!

What’s Included:

✅ 1 pre-cut grip tape (fits selected footpad shape)

📺 Installation Instructions: 🚨As of 8-28-2024 ALL Colored Wraps now come pre-installed onto the back side of the Grip Tape for easier installation. Installation of HEX & RETRO patterns is the same process as our Standard Foam Grip Tape. DO NOT REMOVE the grip tape from in-between the HEX & RETRO Pattern until after installing the grip onto the foot pad! Watch our Grip Tape Install Video below for step-by-step guidance.

Customer Q&A

Q: What causes a board to "ghost" (engage the foot pad sensor with no rider present)?

A: Several factors can cause ghosting:

Overheating the foot pad sensor – This often happens when removing stock grip tape. We recommend using minimal heat—just enough to bring the surface temperature to 125°F. For any leftover adhesive residue, use our Adhesive Remover.
Trapped air pockets – Air trapped between the grip tape and the sensor can create pressure, causing unintended engagement. ALL Ignite Grip Tape & Foam Grip Tape is PERFORATED to prevent air pockets from forming.

Q: Will the foam tear, wear out, or flatten if used by aggressive riders over 200 lbs?

A: Yes and no. The foam will show signs of wear over time but will not tear apart. However, it may start to compress with prolonged use. For heavier riders, we recommend the 2mm foam for increased durability.

Q: How should I clean the grip tape?

A: To clean your grip tape, use a brush—you can add water for a deeper clean to restore its original look. Be carful when using water on you footpad with the sensor!

Q: After reinstalling my front foot pad sensor, it won’t engage. What’s wrong?

A: 99 times out of 100, the issue is swapped cables. Double-check that the tire cable is plugged into the tire connector and the foot pad cable is plugged into the foot pad connector.

Q: Is it difficult to remove Ignite Foam Grip Tape? Do I need a heat gun?

A: No heat gun needed! Our custom-formulated 3M adhesive allows for easy removal while adhering securely to wood, plastic, rubber, urethane, and foam. Plus, it leaves virtually ZERO residue when removed!

Q: Why is my Foam Grip Tape tearing into pieces when removing it?

A: Be sure to pull off the adhesive liner at the same time as the foam. This ensures the entire grip tape and foam come off in one piece instead of breaking into small fragments.

Q: Can I install Ignite Grip Tape/Foam Grip Tape over my existing grip tape, or do I need to remove the old one?

A: Always remove your old grip tape! Installing new grip tape over old grip tape is not recommended as it can cause ghosting issues.

Ghosting Prevention for GT Models

After extensive testing, we’ve cracked the code to eliminate ghosting issues on GT front foot pad sensors! Due to known ghosting concerns and different riding styles, we strongly recommend activating Simple Stop in the Future Motion mobile app.

💡 How does Ignite Foam Grip Tape help prevent ghosting?
The springiness of our foam helps pull the sensors apart, preventing accidental engagement. From our testing, we've seen significant ghosting reduction with our foam grip tape!

⚠ However, if Future Motion can’t guarantee their boards won’t ghost, neither can we. If you're concerned about ghosting, we highly recommend enabling Simple Stop.

⚠️ IMPORTANT WARNING

Removing stock grip tape or adding a pad to your front sensor can be hazardous—DO SO AT YOUR OWN RISK.
🚨 1Wheel Parts LLC is not responsible for bodily injury or property damage.