Mini Quickies are NOT COMPATIBLE with Stock Future Motion Sensors.
Quickie Foot Hold Adapters are a game changer for trail riding, curb nudging/jumping, and carving! Foot holds give your feet just the right amount of grip/grab to help you easily clear obstacles and rough terrain like never before!
Quickies are available in 5 Color options. Black/White/Grey/Blue/Red. The 1WP Quickie is compatible with all 1WP Hooks, Dragan V2, Tomi Boi, as well as a few other style hooks that we have in development that will be releasing shortly! Dragan V1 hooks are NOT COMPATIBLE with our Quickies.
Quickies are manufactured by us in our shop outside Dallas Texas. We use a lightweight modified Polycarbonate blend formulated specifically to our needs. This stuff is crazy strong! Check out the video below of us trying to destroy one!
Installation of 1WP Quickies is a breeze! With our screw hardware kit we include everything needed for a successful install. We include all the screws as well as a Heat Set Counter Sinking Broach and drill bits to pre drill and pilot your holes into your footpad. Quickies are installed by attaching them to the top surface of your footpads. You can mount Quickies from the underside or top side of the foot pad using the included T-Nuts & Counter Sunk Key Nuts. 1WP Quickies are not designed to fit over the sensor. They are designed to go on top of your existing grip tape/padded grip tape.
Includes:
- 1-2 Mini Quickies
- 4qty 4mm Round Stand-off Spacers for Front Footpad Sensor
- 4qty 2mm Round Stand-off Spacers for Front Footpad Sensor
- M4 Hex Key
- M6 Heat Set Brass Insert Broaching Nut with 1WP Clipper Jet Flame Lighter
- 1qty 15/64 Drill Bit
- 1qty 21/64 Drill Bit
- 1-2qty 1WP Foot Hooks & M5 Screws if Selected
Included M6 Screws & Nuts for attaching Quickie to Foot Pad:
- 2-4qty M6 x 20mm SS Black Oxide Flat Head Hex Socket Cap CS Screws
- 2-4qty M6 x 25mm SS Black Oxide Flat Head Hex Socket Cap CS Screws
- 2-4qty M6 x 30mm SS Black Oxide Flat Head Hex Socket Cap CS Screws
- 2-4qty M6 x 35mm SS Black Oxide Flat Head Hex Socket Cap CS Screws
-
2-4qty M6 x 40mm SS Black Oxide Flat Head Hex Socket Cap CS Screws
- 2-4qty M6 Counter Sunk Key Nut
- 2-4qty M6 x 12mm Threaded Brass T-Nut Insert
FST Quickie
Is a super user friendly adapter base that allows the mounting of a wide range of foothold options to the FST footpad front or rear. This system comes with an adapter plate that easily allows you to attach to the FST Foot pad in any position on you footpad.
Install requirements: This system attaches to the FST Foot Pad by using 2 screws. This is by far the easiest system to install. It also offers the most adjustments out of any other system we have. If you have the money then this is the system we recommend!!!
GT/GTS Lowboy Quickie AKA Hooker
Is a foot hook adapter for Future Motion stock footpad/sensors (GT, GTS Lowboy models available).The GT/GTS Quickie allows one to easily mount a wide range of footholds to a stock board without modifying stock sensors or removing the grip tape/padded grip.
Install requirements: Some user-install required (pre-drilling and anchoring 5-6 screws to hold a hooker to a stock footpad)
Compatible: 1WP Hooks, Dragan V2, Tomi Boi, and more compatible options to come.
Universal Quickie
A diy-friendly adapter base that allows the mounting of a wide range of foothold options to ANY footpad front or rear for any board. Some considerations may need to be made for all combinations of sensors and footpads, but offers an expanded aftermarket compatible choice to installing hooks.
Install requirements: 2-3 large holes need to be drilled through the footpad for mounting, stock sensors NOT compatible for front footpad mounting (some positions available if using aftermarket sensor such as StokedStock V4, or other sensor tech). Can be mounted from the underside or top side of the foot pad using the included T-Nuts & Counter Sunk Key Nuts.
Mini-Quickie
A super low-profile diy-friendly adapter base that offers the most adaptability of mounting configurations, with some limits to the compatibility of foothold options. The least weight of all our adapters barring a naked foothold install offering reduced hook/accessory options but the most configurability from its small footprint. These are compatible with the interior and exterior of you foot, giving you more options than any other foot hook on the market!
Install requirements: 2 large holes need to be drilled through the footpad for mounting, stock sensors NOT compatible for front footpad mounting (some positions available if using aftermarket sensor such as StokedStock V4, or other sensor tech). Can be mounted from the underside or top side of the foot pad using the included T-Nuts & Counter Sunk Key Nuts.
Some footpads may not be compatible with an interior mount config (Flightfin style inside of foot) due to extreme thinness of footpad (ex, lowboy). Unless a metal backing plate is used.
Compatible: 1WP Hook-Wing, Tomi Boi, and more compatible options to come!
