UPDATE 9-24-2024 Since we launched the hooker a lot has happened with our foot hold product lines. We now produce these 100% in house at our shop in Dallas Texas. During the process of dialing in the printer settings and materials for our Quickies and 1WP Foot Hooks we have found printing materials and methods that leave our Quickies and Foot Hooks virtually indestructible and super light weight! They are so strong that we are backing them with a Lifetime Warranty!
We have modified the design slightly also! With the newly updated design you no longer need to cut our padded foam griptape to accommodate the shape of the hooker!
**This listing is for 1 Hook Adapter ONLY! If you want a complete set be sure to add BOTH a Left and Right Foot Hook Adapter separately to the cart.**
**10-19-24** ALL Quickies come with our 1WP Foot Hook "Lo".
The 1WP Hookers are here!! We decided to launch this product with a HP MJF Printed Nylon vs Aluminum. MJF 3D Printing is not your normal style of 3D printing, it is the pinnacle of 3D Printing! These are printed on $500k machine!! More info can be found here. Our testing with this material has shown us that our Hookers are Crazy tough.
Quickie Foot Hold Adapters are a game changer for trail riding, curb nudging/jumping, and carving! Foot holds give your feet just the right amount of grip/grab to help you easily clear obstacles and rough terrain like never before! We recommend the angled version for your front foot so you can bail out easier when having to run out a crash
1WP Hookers are height and angle adjustable! We also include a 8mm Spacer to lift your hook up, and a Wedge to decrease or increase the hooks angle by 7° for that perfect fit! With our screw hardware we also include both a T-20 bit to install the screws as well as a drill bit to pre drill your holes into your footpad.
Installation of 1WP hookers is a breeze! We include all the screw hardware and drill bit needed for a successful install. Hookers are installed by attaching them to the outer edge of your footpads. 1WP Hookers were designed to fit over the stock grip tape and sensor. For this older version of the Hooker, if you have foam grip tape you will need to cut the grip tape to the shape of the hooker. The 1WP Hookers are compatible with Onewheel GT Stock Concave Footpads ONLY. For all other footpads we have "Quickies"! The 1WP Hookers are compatible with Dragan V2 hooks, Tomi Boi, as well as a set of hooks that we have in development that will be released shortly! Dragan V1 hooks are NOT COMPATIBLE with our 1WP Hookers.
A ton of people have been asking if these will be available for other footpads. Yes, we plan on making these for other footpads! We had to start somewhere, and stock GT sounded like a good place! Development/release usually takes a few months to happen, so please be patient while we work on all the other designs! We also have a product called "Quickies" 1WP Quickies are a universal footpad adapter that are compatible with Dragan V2 hooks, Tomi Boi, as well as a set of hooks that we have in development that will be released shortly! Dragan V1 hooks are NOT COMPATIBLE with our 1WP Quickies or Hookers. Quickies can easily be attached to any footpad that has V4 Custom Force Sensor. Quickies are NOT COMPATIBLE with Stock Future Motion Sensors.
Includes:
- 1-2qty 1WP Foot Hook - Lo
- 4-8qty M5 x 35mm SS Black Oxide Flat Head Hex Socket Cap Screws for 1WP Foot Hook - Lo
- 4-8qty M5 x 18mm SS Black Oxide Flat Head Hex Socket Cap Screws
-
6-12qty 4mm x 25mm Course Thread Torx20 Black Oxide Screws
- 1-2qty 8mm Spacer
- 1-2qty +7 Closing & -7 Opening Wedge
- T20 Bit
- 3mm Bit
- 1/4 Bit Driver Tool
- 1qty 3/32 Drill Bit
FST Quickie
Is a super user friendly adapter base that allows the mounting of a wide range of foothold options to the FST footpad front or rear. This system comes with an adapter plate that easily allows you to attach to the FST Foot pad in any position on you footpad.
Install requirements: This system attaches to the FST Foot Pad by using 2 screws. This is by far the easiest system to install. It also offers the most adjustments out of any other system we have. If you have the money then this is the system we recommend!!!
GT/GTS Lowboy Quickie
Is a foot hook adapter for Future Motion stock footpad/sensors (GT, GTS Lowboy models available).The GT/GTS Quickie allows one to easily mount a wide range of footholds to a stock board without modifying stock sensors or removing the grip tape/padded grip.
Install requirements: Some user-install required (pre-drilling and anchoring 5-6 screws to hold a hooker to a stock footpad)
Compatible: 1WP Hooks, Dragan V2, Tomi Boi, and more compatible options to come.
Universal Quickie
A diy-friendly adapter base that allows the mounting of a wide range of foothold options to ANY footpad front or rear for any board. Some considerations may need to be made for all combinations of sensors and footpads, but offers an expanded aftermarket compatible choice to installing hooks.
Install requirements: 2-3 large holes need to be drilled through the footpad for mounting, stock sensors NOT compatible for front footpad mounting (some positions available if using aftermarket sensor such as StokedStock V4, or other sensor tech). Can be mounted from the underside or top side of the foot pad using the included T-Nuts & Counter Sunk Key Nuts.
Mini-Quickie
A super low-profile diy-friendly adapter base that offers the most adaptability of mounting configurations, with some limits to the compatibility of foothold options. The least weight of all our adapters barring a naked foothold install offering reduced hook/accessory options but the most configurability from its small footprint. These are compatible with the interior and exterior of you foot, giving you more options than any other foot hook on the market!
Install requirements: 2 large holes need to be drilled through the footpad for mounting, stock sensors NOT compatible for front footpad mounting (some positions available if using aftermarket sensor such as StokedStock V4, or other sensor tech). Can be mounted from the underside or top side of the foot pad using the included T-Nuts & Counter Sunk Key Nuts.
Some footpads may not be compatible with an interior mount config (Flightfin style inside of foot) due to extreme thinness of footpad (ex, lowboy). Unless a metal backing plate is used.
Compatible: 1WP Hooks, Tomi Boi, and more compatible options to come!